Модель машины: |
NM-EJR3A/NM-EJR4A |
Тип машины: |
Radial insertion RG131 |
Макс. скорость: |
0.25s~0.6s/component |
Размер компонентов приложения: |
Шаг 2,5/5,0 мм,7.5мм и 10 мм(выбор) |
Диаметры печатных плат(Д*В): |
50 x 50 мм до 508 x 381мм |
Источник электричества: |
3-фаза AC200В,3.5Ква |
Клеймо: |
Панасоник |
Пневматический источник: |
0.5Мпа,80л/мин(А.Н.Р.) |
Размер машины(Д*Ш*В): |
3200mm x 2417mm x 1620mm |
Вес брутто: |
2250 КГ |
Время упреждения: |
10 будни |
Способ отгрузки: |
По морю |
Условия оплаты: |
Т/Т |
|
|
Operability enhancement
Identical control panels are set up at the front side and the rear side of the RG131 so that operability can be significantly improved.
(Standard specification)
The liquid crystal touch panel is employed for the control panel and easy operation can be provided by the operation guidance indication.
Japanese, English, or Chinese can be selected by the one-touch operation as the language used for the screen displays.
The new controller can store up to 200 types of programs. Data can be input to and output from high-capacity SD memory cards.
NC data of our conventional equipment (RH series) can be used by the RG131.
Setup support functions that display the component layout of the component supply unit on the screen are provided.
Maintenance support functions that display information of regular maintenance time and operation content are provided.
Reduction of running cost
Expendable parts of the RG131 such as the Anvil blade, lead cutter, chuck rubber, and pusher rubber are compatible with those of the RHSG.
The transfer system, the XY table, the controller, and the driver can be used in any one of the Insertion machine series.
The setup and maintenance operations are standardized.
Особенность:
Higher insertion speed and operation efficiency improve productivity
Either one of 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec. can be selected for insertion pitch.
Realized high speed insertion at a rate of between 0.25 s and 0.6 s per component. even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec.
The use of guide pins makes high-density insertion possible when there is a gap between components.
Модель:РГ131
Model No. NM-EJR3A- NM-EJR4A
Размеры печатной платы (миллиметр) L 50 x W 50 to L 508 x W 381
Макс. скорость 1 0.25 s/component to 0.6 с/компонент
No.of component inputs: 40-80 (Connection mode), 40 + 40 (Exchange mode)
Applicable components Pitch 2.5 миллиметр, 5.0 миллиметр, 7.5 миллиметр, 10.0 миллиметр
Height Hn=Max. 26 mm Diameter D=Max. 18 миллиметр
Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
PCB exchange time about 2 s to about 4 s (Room temperature 20°C)
Insertion direction 4 directions (0 °, 90 °, -90 °, 180 °)
Источник электричества *2 3-phase AC 200 V, 3.5 Ква
Пневматический источник 0.5 Мпа, 80 л/мин (А.Н.Р.)
Размеры (миллиметр) W 3 200 x D 2 417 x H 1 620 *3
Mass Weight 2250 kg-2350 kg
Модель радиального станка
|
Скорость/с/чип
|
Размеры печатной платы
|
Применимые компоненты
|
Клеймо
|
РЛ131 NM-EJR1A |
0.17 |
От Д50 мм x Ш50 мм до Д508 мм x Ш381 мм |
Шаг 2,5,5,0 мм, hn = макс.21 мм, D = макс.13 мм |
Панасоник |
РГ131 NM-EJR3A |
0.25~0.6 |
От Д50 мм x Ш50 мм до Д508 мм x Ш381 мм |
Шаг 2,5,5,0 мм,7.5мм и 10 мм(выбор) |
Панасоник |
РХС2Б НМ−РА20А |
0.17 |
От Д50 мм x Ш50 мм до Д508 мм x Ш381 мм |
Шаг 2,5,5,0 мм |
Панасоник |
РГСГ НМ-РБ00А |
0.25 |
Д50 мм x Ш50 мм до Д330 мм x Ш250 мм |
Шаг 2,5 мм,5.0миллиметр |
Панасоник |
Совместная работа с FS, Мы можем предоставить полную линию SMT для вставки THT PTH для всех клиентов по сборке печатных плат по всему миру. Мы можем предоставить полный спектр услуг по проектированию, снабжение, монтаж к пуско-наладочным работам ; Для получения дополнительной информации.