로더 정전기 방지 SMT ESD 매거진 랙 355*320*563mm 설치

You are here(현재 위치): » 소식 & 이벤트 » Loader anti-static SMT ESD magazine rack 355*320*563mm installation


Before you received goods and checking the spare parts condition if all are good.

1단계: 먼저 상부 및 하부 금속판에 플라스틱 기어 스트립을 설치합니다, 그리고 버튼을 손으로 누릅니다..
2단계: Then fix the two square pillars with screws (washers are required under each screw)
Step3: Then install the fixed side plate, and fix it with screws and washers on both sides (note: the metal of the fixed side plate should be aligned with one side of the plastic gear strip)
Step4: Install the active side plate and after that fixed another two square pillars with screws.(washers are required under each screw)
Step5: Use both hands to push the movable side plate upwards until the two PINS catch the upper and lower metal plates
Step6: Finally, install the metal gear lever

범주: 소식 & 이벤트 | 태그:
저작권 2008-2024 Shenzhen FS equipment CO.,LTD 판권 소유.
사이트맵 | 상단↑