Modèle de machine: |
NM-EJR3A/NM-EJR4A |
Machine Type: |
Radial insertion RG131 |
Max. vitesse: |
0.25s~0.6s/component |
Application components size: |
Pitch 2.5/5.0mm,7.5mm and 10mm(option) |
Diamètres des circuits imprimés(L*W): |
50 x 50 mm à 508 x 381 millimètre |
Source électrique: |
3-phase AC200V,3.5Kva |
Marque: |
Panasonic |
Source pneumatique: |
0.5Mpa,80L/min(A.N.R) |
Taille de la machine(L*W*H): |
3200mm x 2417mm x 1620mm |
Poids brut: |
2250 KG |
Delai: |
10 jours ouvrables |
Mode d’expédition: |
Par voie maritime |
Modalités de paiement: |
T/T |
|
|
Operability enhancement
Identical control panels are set up at the front side and the rear side of the RG131 so that operability can be significantly improved.
(Standard specification)
The liquid crystal touch panel is employed for the control panel and easy operation can be provided by the operation guidance indication.
Japanese, English, or Chinese can be selected by the one-touch operation as the language used for the screen displays.
The new controller can store up to 200 types of programs. Data can be input to and output from high-capacity SD memory cards.
NC data of our conventional equipment (RH series) can be used by the RG131.
Setup support functions that display the component layout of the component supply unit on the screen are provided.
Maintenance support functions that display information of regular maintenance time and operation content are provided.
Reduction of running cost
Expendable parts of the RG131 such as the Anvil blade, lead cutter, chuck rubber, and pusher rubber are compatible with those of the RHSG.
The transfer system, the XY table, the controller, and the driver can be used in any one of the Insertion machine series.
The setup and maintenance operations are standardized.
Feature:
Higher insertion speed and operation efficiency improve productivity
Either one of 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec. can be selected for insertion pitch.
Realized high speed insertion at a rate of between 0.25 s and 0.6 s per component. even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec.
The use of guide pins makes high-density insertion possible when there is a gap between components.
Modèle:RG131
Model No. NM-EJR3A- NM-EJR4A
Dimensions du circuit imprimé (mm) L 50 x W 50 to L 508 x W 381
Max. vitesse 1 0.25 s/component to 0.6 s/component
No.of component inputs: 40-80 (Connection mode), 40 + 40 (Exchange mode)
Applicable components Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Height Hn=Max. 26 mm Diameter D=Max. 18 mm
Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
PCB exchange time about 2 s to about 4 s (Room temperature 20°C)
Insertion direction 4 directions (0 °, 90 °, -90 °, 180 °)
Source électrique *2 3-phase AC 200 V, 3.5 Kva
Source pneumatique 0.5 Mpa, 80 L/min (A.N.R.)
Taille (mm) W 3 200 x D 2 417 x H 1 620 *3
Mass Weight 2250 kg-2350 kg
Modèle de machine radiale
|
Vitesse/s/puce
|
Dimensions du circuit imprimé
|
Applicable components
|
Marque
|
RL131 NM-EJR1A |
0.17 |
L50mm x l50 mm à L508mm x l381mm |
Pitch 2.5,5.0mm, Hn = Max.21mm, D = Max.13mm |
Panasonic |
RG131 NM-EJR3A |
0.25~0.6 |
L50mm x l50 mm à L508mm x l381mm |
Pitch 2.5,5.0mm,7.5mm and 10mm(option) |
Panasonic |
RHS2B NM−RA20A |
0.17 |
L50mm x l50 mm à L508mm x l381mm |
Pitch 2.5,5.0mm |
Panasonic |
RHSG NM-RB00A |
0.25 |
L50mm x l50 mm à L330mm x l250mm |
Pitch 2.5mm,5.0mm |
Panasonic |
Working together with FS, we are able to provide a complete SMT insertion THT PTH line for all PCB assembly customers all over the world. Nous pouvons fournir le service complet dès la conception, approvisionnement, de l’installation à la mise en service ; pour plus d’informations.