| Ersatzteile(24 H)-Fiona |  |
| Ausrüstung-Lee | |
| Verbrauchsmaterialien für die Instandhaltung-Jessica | |
|
|
Horizontal Panasonic plug-insertion machine AV131(NM-EJA3A-NM-EJA2A): AV131 uses 0.12s/point high-speed plug-in and an axial component plug-in machine that increases productivity within the expansion speed. The equipment runs stably and does not require an external transformer.
Größe des Substrats: L50mm*W50mm-L508mm*W381mm
Plug-in speed: 0.12s/point
Number of components: 60+60+JW (JW option)/60+JW
Target components: resistance 1/8W, 1/6W, 1/4W, 1/2W, jumper wire (tin pin wire) two tube, cylindrical ceramic capacitor
Substrate replacement time: about 2.0s
Component insertion direction: 4 Wegbeschreibungen (0 Grad, 90 Grad, 180 Grad, 270 Grad)
Stromversorgung: three-phase AC200V, 4KVA
Air pressure source: 0.5MPA, 150L/min (A.N.R)
Größe der Ausrüstung: W4070mm*D1910mm*H1610mm W2810mm*D1910mm*H1610mm
Equipment weight: 2520KG, 1750KG
The automatic insert machine is a machine that automatically installs the tape electronic components on the printed circuit board according to the program. The traditional electronics assembly industry relies mainly on workers to insert electronic components onto circuit boards. Seit der Massenproduktion von Maschinen, the speed of manual insertion is slow, and the defects of poor workmanship are exposed. Die Verwendung der axialen oder radialen Maschine zur automatischen Installation der elektronischen Originale auf der Leiterplatte kann Arbeitskosten sparen und das Niveau der steckbaren Verarbeitung verbessern.
AVK PISTON
cutter AVP/RH3 CUTTER X050927T/X050927
Blade AV/RH CUTTER X004-250-S94
Cut tool AVP CUTTER 1020719356
Blade tool AVP CUTTER 20718814
Panasonic cutter blade fixed AV-RH FIXED BLADE X018553
|
Radiale Maschine Modell
|
Geschwindigkeit/s/Chip
|
Abmessungen der Leiterplatte
|
Teilung der Komponenten
|
Feeder
|
| AV131 NM-EJA3A | 0.12 | L50mm x B50 mm bis L508mm x B381mm | 5-26Mm | 20Pcs(26/52Mm) |
| AVK2B NM-AA20 | 24,000CPH(0.15S/Chip) | L50mm x B50 mm bis L508mm x B381mm | 5-26Mm | 20Pcs(26/52Mm) |
| AVK3 NM−AA30 | 0.12 | L50mm x B50 mm bis L508mm x B381mm | 5-26Mm | 20Pcs(26/52Mm) |
| AVK2 NM-RB00A | 0.15 | L50mm x B50 mm bis L330mm x B250mm | 5-26Mm | 20Pcs(26/52Mm) |
