| Spare parts(24 H)-Fiona |  |
| Equipment-Lee | |
| Maintainance consumables-Jessica | |
|
|
The parameters of the squeegee include the material, thickness and width of the squeegee, the elasticity of the squeegee relative to the blade holder, and the angle of the squeegee to the stencil, etc. These parameters all affect the distribution of solder paste to varying degrees. The angle of the squeegee relative to the stencil When the temperature is 60°-65°, the quality of solder paste printing is the best.
When we use squeegee and we have to adjust suitable right pressure of squeegee. Excessive pressure will shorten the life of scraper and steel plate.
According the following different size of squeegee and balde. The pressure is not alike. How to caculate the pressure? For example,If your scraper squeegee is 200MM. Thickness 0.2MM.The pressure of the cylinder is 1MPA.Then pressure=(200*0.2/1000000)*1000000/9.8=4.08KG
SQY ASSY(60deg*170mm)METAL :15mm OVERHANG SQA300
SQY ASSY(60deg*200mm)METAL :15mm OVERHANG SQA301
SQY ASSY(60deg*250mm)METAL :15mm OVERHANG SQA302
SQY ASSY(60deg*300mm)METAL :15mm OVERHANG SQA303
SQY ASSY(60deg*350mm)METAL :15mm OVERHANG SQA304
SQY ASSY(60deg*400mm)METAL :15mm OVERHANG SQA305
SQY ASSY(60deg*440mm)METAL :15mm OVERHANG SQA306
SQY ASSY(60deg*483mm)METAL :15mm OVERHANG SQA307
SQY ASSY(60deg*510mm)METAL :15mm OVERHANG SQA308
SQY ASSY(60deg*535mm)METAL :15mm OVERHANG SQA309
170mm metal squeegee blade DEK 129924
200mm metal squeegee blade DEK 129925
250mm metal squeegee blade DEK 133584
300mm metal squeegee blade DEK 133585
350mm metal squeegee blade DEK 129926
400mm metal squeegee blade DEK 133586
440mm metal squeegee blade DEK 129927
483mm metal squeegee blade DEK 133587
510mm metal squeegee blade DEK 133588
535mm metal squeegee blade DEK 129928
