| Spare parts(24 H)-Fiona |  |
| Equipment-Lee | |
| Maintainance consumables-Jessica | |
|
|
Problem:Do you feel frustrated about the frequent damage of the 0402 resistor and capacitor of the GXH-1S.
Some were cracked after passing through the reflow oven and some were cracked under a high magnification microscope. The nozzles and placement head are regularly maintained and calibrated, as well as CPK calibration. How to solve this problem?
Solution:
1. Check whether the thickness of the components in the database matches the actual material. The thickness of different brands will be different.
2. Check the mounting height of components and whether the pressing force is too large.
3. Whether the calibration value of the head height is normal.
We also experienced the following other nozzles issue which you also faced. Contact us for solution.
FA04,630 132 9253
FA06,630 132 9277
FC35,630 133 6497
FE05,630 133 8415
FE28,630 148 1418
FF02,630 133 2611
HA05,630 129 2939
HA10,630 128 4842
HB03,630 129 2908
HG31,630 158 6571
HG81,630 161 3501
HV01,630 129 2878
HV03,630 129 2892
HV51,630 152 8472
PA05,630 133 5407
PV01,630 132 2322
HG51,630 159 9632
RA06,630 136 2373
VA05,630 141 7561
VC75,630 155 7243
VE01,630 130 8593
VF02,630 129 8252
VF05,630 130 9255
VF07,630 143 8887
